CAR WASH PROFESSIONAL PROCESS

I. Spray total body water

Use tap water spray for total body preliminary "softening" stains, spray to wet the goal is to spray the car rather than "strong". The impurities in the water will soften, creating favorable conditions for a strong spray afterwards.

- Currently, in the car wash points, the first thing that many "image" is often high-pressure water spray into the car rumbling. The reason is that they want to spray to clean off the sand before the snow foam. But the problem is that the number of clean sand before it was a great pressure and push down the long slide on a piece of painted surfaces before flying away. This is invisible to the naked eye but actually it might create scratches without anyone knowing.

II. Hygiene floor cushion

Get out of the car floor buffer flushing, laundry and dry cleaning. Leaving the vehicle after cleaning the interior.

III. Wash gear, wheels and chassis

1. Preparing the tire brush, brush clearance, wheel and chassis wipes, soft brush. 1 Use clean buckets and buckets phase 1 car wash solution, the percentage recommended by the manufacturer (I use the type Sonax salons, doctors also want to save, use type 2 solution on the market to sell more or shampoo, do not use dishwashing liquid or laundry detergent offline :)).

2. Use a spray nozzle high pressure in order wheels, tires, wheel and sidesteps niches. Use a soft brush to clean towel + wheels, tire scrub brushes, cleaning towels soft brush + waistline part, sidesteps. These items must be embedded into the bucket before cleaning solution and embedded buckets to remove dirt before you clean the other part. After partially washed off with water to slight discharge, avoid liquid and dry dirt sticking to the car.

3. Spray roar with high-pressure nozzle (avoid spray roar from the first step when the machine is hot will harm the machine). Brush and towel dipped in a solution to scrub the chassis and components in the wheel, spray again the details were cleaned.

IV. Body wash

1. Prepare soft brush, body wipes (used cloths Microfiber material is dedicated, the doctor can be purchased at booths for automotive accessories in Metro offline), 1 bucket of clean water and 1 bucket car wash solution.

2. Use high pressure nozzles are spraying water on the vehicle from top to bottom, from front to back (angle between 30 º nozzle - 45º, the gap compared with bodywork custom hose injection pressure of each nozzle, spray water pressure must be strong enough to do away stains and scratches are not too hard to make the car paint). The place was dirty severe softening in Step I, the spray will drift away easier.

3. Use two buckets, one bucket for clean water and one bucket dump enough water to mix with dedicated car wash solution. Embed car wash towel into the solution and scrub bucket gently partially oriented from top to bottom. Wash movement horizontally or vertically, limited washing circular. Soft brushes used to clean the cavity detail, edge. Upon termination portion, towel and brush dipped into a bucket of clean water, washing and drainage, before embedded solution bucket. This is to minimize the carrying dirt, sand from the tank being cleaned in the solution and rub it back up the paint.

- In a conventional car wash, the physician may notice the snow foam cleaning up all the body, then he is only using a rag divers scouring the roof and bonnet peg this shift, from front to back, even the vehicle hull. So if the car remains a little soil, sand ... it has been "dragged" from one place to another to arrive, along with strong scouring power will scratch the paint, resulting in a long time, car paint no matter how good colors also scratch and sunk :(

- The car wash dish soap used to wash the car (cost savings), this one is extremely toxic to the vehicle's paint as dishwashing liquid strongly alkaline (If he does well to wash at home user attention dedicated solution or at least shampoo to wash the car offline!)

V. Drain

According to partial discharge as soon as the break was over to wash the soap film and dirt, prevent fluid from drying on the surface, clinging to the car backwards.

Use a high-pressure nozzle as instructed above to spray clean the whole car completely after washing.

FOR. Dry

Dry cloth (this type of doctor also must use the dedicated offline) to wipe the whole body, to avoid the water run off water will leave streaks blurred. Using techniques similar dry towel towel car wash process.

- After the washing is complete, the doctor noticed'll paint ball, cleaner and more slippery touching: dly reason is the dedicated car wash solution contains a conditioner of the ball, this ball will do nursing class for hard coating and shiny dust normal washing.

VII. Interior cleaning

1. Cleaning ashtrays.

2. Wipe the dirt on the dash (clock area, glove compartment, lever, steering wheel, ...), part of the door and the door edges, chassis with a damp cloth, dry spray hose after cleaning is complete.

3. Use a dry towel and dedicated windshield washer fluid to clean the glass part.

4. Use a damp cloth + vacuum cleaner to clean the other components within the vehicle interior.

VIII. Spray tire maintenance solution

Tire maintenance solution will protect and keep the black rubber ball for tires. Spray tire maintenance solution after completing the car wash step.

IX. Check the vehicle status

Check the entire car, dedicated use bleach to remove some stubborn stains, such as glue, tar, bird droppings ...

Car washing process is quite important in the process of maintenance and car care. Good doctors are always those who rode clean vehicles as standard offline